|
INSTRUMENTS + Shared Cockpit: Debouncing is improved on the LSK8 key of the ARCDU (to switch the transponder mode) (PRO)
+ FMS graphic artifacts fixes
+ Alternate gear release: inhibit switch is not required to open the nose gear doors by pulling the release handle
+ ND: Improved overlay display logic
+ ELEVATOR ASYMMETRY incorrect light fixed
+ EFIS: CRS1/CRS2 tooltip course will be from the NAV, if FMS is selected
+ ARCDU, FMS Tune page: increased ADF range to 1999kHz
+ Numerous fixes to the mouse acceleration in rotating knobs
+ EFIS FC system page: Fine tuned the rudder indication to correspond exactly to the real aircraft indication
+ PFD graphics fixes SYSTEMS + FlightControls: Steering NSW system activation delay of 7 seconds is implemented
+ CEGPWSSystem: WarningGenerator: 4B mode (flaps) will account for flaps override switch
+ AFCS: GA button modes activation is fixed
+ CAntiiceSystem: Engine door lights stay lit without electrical power, fixed
+ Flight Controls: Fixed the rudder travel restriction versus flaps, when the rudder sensitivity factor in the mjc84.ini is below 1.0
+ Flight Controls: Free steering is added (free caster mode)
+ mjc84.ini: added TillerDeadZone variable to tune the dead zone for the steering tiller
+ PCU AUPC module: added delay of 1/2 seconds prior to feather protection, to prevent inadvertent feather for the props in flight
+ Electrics: DC BUS TIE will not close if both DC Gens failed
+ Engine control: Re-written the mouse drag procedure of the Condition Levers sync with the simconnect
+ FMS: Fixed the incorrect MAP elevation detection
+ FMS TUNE page: Fixed entering ATC code 0001-0004 result in memory selection
+ FMS ETP/PNR: Fixed incorrect FOB fuel kg input on page 2 (PRO)
+ FMS: Added EXITS page under SERVICES
+ FMS: 7 seconds unilink delay instead of 1 second (to improve the shared cockpit sync)
+ FMS: Fixed the incorrect index for waypoints beginning with NAN
+ Nav system: Navaids data will be re-loaded after the aircraft reposition
+ TCAS system: Added audio warning supression for <400ft on approach and <600ft on departure
+ TCAS System: Will not initialize to TA/RA on the ground and <900 ft agl
+ TCAS System: INCREASE DESCEND is blocked <1450ft
+ HGS: Forcing the windshield non-transparent to increase the "IMC" effect triggered from the System Panel
+ Maintenance: Refinements to the wear-off (random failures)
+ NAV framework: Migrated the database from the MS Access to SQL Lite format APPS: + Syspan: Removed the restriction for the systems which can be used by the user pages, and added the restriction of 3 pages limit (PRO)
+ Syspan: Additional failures on the avionics page (PRO)
+ Syspan: Added failure re-set buttons on all of the pages DOCS: + syspan specification: Added failure0TextValue to the page specification The MJC8 Q400 addon for Microsoft Flight Simulator X and Lockheed Martin Prepar3d v2 is a highly realistic rendition, built after the Bombardier (tm) Dash8 Q400 aircraft. There are 3 available editions, differentiating in the price and the included features. - "PILOT" is an edition, designed for home flightsimmers, who want a state-of-the-art hardcore add-on but do not require the complex features, such as the instructor panel system monitoring, circuit breakers simulation, failures simulation, or the shared cockpit.
- "PRO" edition is for advanced users, or airline pilots wishing to improve their knowledge of the Dash8 Q400 airplane. This edition has all the features of the PILOT edition, plus the Headup Guidance System simulation, the shared cockpit feature and several more (please see the comparative table below for the full list).
- "TRAINING" edition is dedicated to the airlines, wishing to have a good quality inexpensive solution for the Dash8 Q400 technical and procedural training for both technical staff and the flight crews. The table below enumerates all the main features per version.
| 
English
